The GB-E-type of Inter-Connector, used for
board to board and component to board connections, consists of a row of gold-plated brass wires in silicone rubber. Randomly positioning the Inter-Connector between contact pads and providing compression will realize a stable, low resistance connection.
Furthermore, the GB-E-type is used as base of a wide range of special custom designs of Inter-Connectors with additional moulding frames or holders for connecting microphone, speaker, coin-batteries, sensors and other electronic components, providing a module of component and Inter-Connector. Such Inter-Connector system provides a combination of electrical connection and mechanical or acoustic functions.
For harsh environments, an alternative type of conductive wire can be used, based on Nikkel-Titanium, to provide extra contact pressure and eliminate negative effects of vibrations and mechanical shock.
Outline Dimensions:
 |
 |
 |
|
GB-E-type
|
Application
|
Application
|
Design examples:
 |
 |
 |
 |
| GB-type 4 rows of wires |
GB-wizard-type 7 rows of wires |
GB-wizard-type (detail) 7 rows of wires |
GB-sushi-type for pressure sensor |
Dimensions and Tolerances:
|
|
|
Unit
|
0.05P | 0.10P | 0.20P |
|
Pitch
|
P
|
mm
|
0.05 +0.03/-0.01 | 0.10 ± 0.05 | 0.20 ± 0.05 |
|
Length
|
L
|
mm
|
2.0 ~ 25.0 ± 0.2 25.1 ~ 50.0 ± 0.3
50.1 ~ 80.0 ± 0.5 80.1 ~ 120.0 ± 0.8 200.1 ~ 250.0 ± 1.6 |
||
|
Height *
|
H
|
mm
|
1.0 ~ 5.0 ± 0.1
5.1 ~ 10.0 ±0.15 10.1 ~ 20.0 ±0.2 |
||
|
Width
|
W
|
mm
|
1.0 ~ 2.4 ± 0.1
2.5 ~ 4.0 ± 0.15 |
||
|
Filament diameter
|
|
μm
|
30 | 40 | 40 |
* H ≥ W/2
Adhesive on one side available on request.
Special design with comolded section available on request.
Basic Properties:
|
|
|
Unit
|
|
|
Contact resistance *
|
|
Ω
|
< 0.1
|
|
Current carrying capacity **
|
|
mA/wire
|
50
|
|
Dielectric breakdown voltage
|
Isolator
|
V/m
|
23•106 ~ 27•106
|
|
Isolation resistance (500V DC) *
|
Ω
|
> 1.0•109
|
|
|
Operating temperature range
|
|
°C
|
-25 ~ 85
|
* Tests carried out with Shin-Etsu standard methods.
** Average when using multiple wires per electric connection.
Compression Curves:
 |
 |
| Samples size: 0.1P 10.0L 2.0H 1.0W Inner diameter of holder: 1.0H 1.0W electrode 1: 0.4 mm wide Au-plated Cu-track electrode 2: Au-plated Cu-plate, no holder |
Samples size: 0.1P 50.0L 1.0H 1.0W electrode 1: 2.0 mm wide Au-plated Cu-track electrode 2: Au-plated Cu-plate |
Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions. More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice you own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.
