The SX-type of Inter-Connector, developed for very fine pitch large monochrome 
dot-matrix STN LCD panels, is basically an S-type with both sides softer isolative support material to ease compression and reduce compression force.
The SX-type is keeping the resistance low by using low resistance carbon particle material as conductor and a wide conductive core section. The SX-type can be used for some board to board connections due to it's low resistance.
Outline Dimensions:
 |
 |
|
|
SX-type
|
|
Application
|
Dimensions and Tolerances:
|
|
|
Unit
|
0.03P
|
|
Pitch
|
P
|
mm
|
0.03 +0.03/-0.01
|
|
Length
|
L
|
mm
|
2.0 ~ 20.0 ± 0.15 20.1 ~ 90.0 ± 0.65%
90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 300.0 ± 1.0 |
|
Height *
|
H
|
mm
|
1.0 ~ 5.0 ± 0.1
5.1 ~ 20.0 +0.15/-0.1 |
|
Width
|
W
|
mm
|
1.5, 2.0 ± 0.1
2.5, 3.0, 3.5, 4.0, 4.5, 5.0 ± 0.15 |
|
Width conductive core
|
Z
|
mm
|
0.7 ± 0.05
|
* H ≥ W/2
Adhesive on one side available on request.
Basic Properties:
|
|
|
Unit
|
|
|
Specific gravity
|
Isolator
Conductor Side isolation |
|
1.15
1.15 1.05 |
|
Shore hardness A
|
Isolator
Conductor Side isolation |
ISO7619A
|
60 ~ 65
70 ~ 75 35 ~ 40 |
|
Compression set *
|
|
%
|
15 ~ 20
|
|
Volume resistance
|
Isolator
Conductor Side isolation |
Ω.m
|
1.0•1012
1.0•109 |
|
Dielectric breakdown voltage
|
Isolator
Side isolation |
V/m
|
23•106 ~ 27•106
23•106 ~ 27•106 |
|
Isolation resistance (500V DC) *
|
Ω |
> 1.0•109
|
|
|
Operating temperature range
|
|
°C
|
-25 ~ 85
|
* Tests carried out with Shin-Etsu standard methods.
Compression Curves:
 |
 |
| samples size: 0.03P 50.0L 5.0H 2.6W 0.7Z electrode 1: 0.4 mm wide Au-plated Cu-track electrode 2: Au-plated Cu-plate, no holder |
Heat dissipation due to current load. sample size: 0.05P 50.0L 5.0H 4.0W 0.7Z electrode 1: 0.6 mm wide Au-plated Cu track electrode 2: Au-plated Cu plate, no holder |
Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions. More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice you own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.
