The DM-type of Inter-Connector, used as support 
material to balance pressure at LCD's using elastomeric Inter-Connectors or as protection sheet or spacer, is a bar of silicone rubber.
The material, material hardness and additional adhesive tape or anti-stretch film of the DM-type are specified to custom design.
Outline Dimensions:
 |
 |
|
|
DM-type
|
|
Application
|
Dimensions, tolerances and basic properties:
| Material type |
Unit
|
SS-20 | SS-50 | W-70 | SPH-151 | |
|
Color tone
|
mm
|
Translucent grey | Translucent grey | Grey white | White | |
|
Shore hardness A
|
ISO 7619A |
20° ± 5°
|
50° ± 5° | 70°± 5° | 8°± 5° | |
|
Silicone rubber
|
|
Solid insulative
|
Solid insulative | Solid insulative | Sponge insulative | |
| Specific gravity |
1.10 |
1.15 | 1.20 | 0.6 | ||
| Tensile strength | MPa | ≥ 2.0 | ≥ 6.0 | ≥ 6.8 | ≥ 1.8 | |
| Elongation | % | 300 ~ 400 | 250 ~ 400 | 180 ~ 250 | ≥ 350 | |
| Compression set * | % | 5 ~ 15 | 5 ~ 15 | 5 ~ 15 | ≤ 30 | |
| Volume resistivity | Ω.m | 8.0•1011 | 8.0•1011 | 1.0•1012 | 1.0•109 | |
| Isolation resistance (500V DC) * |
Ω | > 1.0•109 | ||||
| Dielectric breakdown voltage |
V/m | 23•106 ~ 27•106 | 20•106 ~ 25•106 | |||
| Operating temp. range |
°C | -25 ~ 85 | ||||
| Length | L | mm | 1.0 ~ 10.0 ± 0.1 10.1 ~ 370.0 ± 1% |
1.0 ~ 10.0 ± 0.1 10.1 ~ 370.0 ± 1% |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 290.0 ± 1.0 |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 270.0 ± 1.0 270.1 ~ 370.0 ± 1% |
| Height | H | mm | 1.0 ~ 10.0 ± 0.1 10.1 ~ 250.0 ± 1% |
1.0 ~ 10.0 ± 0.1 10.1 ~ 250.0 ± 1% |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 250.0 ± 1.0 |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 250.0 ± 1.0 |
|
Width
|
W |
mm
|
0.2 ~ 2.3 ± 0.1
2.4 ~ 6.0 ±0.15 |
0.2 ~ 2.3 ± 0.1 2.4 ~ 6.0 ±0.15 |
0.3 ~ 2.3 ± 0.1 2.4 ~ 5.0 ±0.15 |
0.8 ~ 2.3 ± 0.1 2.4 ~ 5.0 ±0.15 |
| Material type |
Unit
|
SPO-951 | UL-50 | NA-50B | VO-50 | |
|
Color tone
|
mm
|
Pink | Light grey | Grey | Black | |
|
Shore hardness A
|
ISO 7619A |
20° ± 5°
|
50° ± 5° | 50°± 5° | 50°± 5° | |
|
Silicone rubber
|
Sponge insulative
|
Solid insulative | Solid insulative | Solid insulative | ||
| Specific gravity |
0.7 |
1.50 | 1.15 | 1.30 | ||
| Tensile strength | MPa | ≥ 2.8 | ≥ 4.5 | ≥ 6.0 | ≥ 4.5 | |
| Elongation | % | ≥ 250 | ≥ 350 | 250 ~ 400 | ≥ 300 | |
| Compression set * | % | 10 ~ 20 | 40 | 5 ~ 15 | 40 | |
| Volume resistivity | Ω.m |
1.0•109 |
1.0•1012 | 8.0•1011 | 1.0•1012 | |
| Isolation resistance (500V DC) * |
Ω | > 1.0•109 | ||||
| Dielectric breakdown voltage |
V/m | 20•106 ~ 25•106 |
23•106 ~ 27•106 |
|||
| Operating temp. range |
°C | -25 ~ 85 | ||||
| Length | L | mm | 1.0 ~ 10.0 ± 0.1 10.1 ~ 370.0 ± 1% |
1.0 ~ 10.0 ± 0.1 10.1 ~ 370.0 ± 1% |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 400.0 ± 1% |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 270.0 ± 1.0 270.1 ~ 370.0 ± 1% |
| Height | H | mm | 1.0 ~ 10.0 ± 0.1 10.1 ~ 250.0 ± 1% |
1.0 ~ 10.0 ± 0.1 10.1 ~ 250.0 ± 1% |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 250.0 ± 1.0 |
1.0 ~ 90.0 ± 0.65% 90.1 ~ 150.0 ± 0.6 150.1 ~ 200.0 ± 0.8 200.1 ~ 250.0 ± 1.0 |
|
Width
|
W |
mm
|
0.4 ~ 2.3 ± 0.1
2.4 ~ 6.0 ±0.15 |
0.2 ~ 2.3 ± 0.1 2.4 ~ 6.0 ±0.15 |
0.1 ~ 0.5 ± 0.1 | 0.1 ~ 0.5 ± 0.1 |
SS-20 material is used as support material for the SS-type of Inter-Connector.
SPO-951 material is used as support material for the SG-type of Inter-Connector.
UL-50 is UL listed material.
* Tests carried out with Shin-Etsu standard methods.
Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions. More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice you own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.
