|
|
Shin-Etsu Mille-tint Film" is a mirror surface film for insertion or heat molding, processed using our original LCS (Laminate Calendar System) technology processing... |
This pre-colored film provides a mirror-finished molding with a luxury appearance, eliminating the need for mirror-finishing by color coating.
Features:
1. Features of film
(1) Excellent UV Ray resistant and scratch resistant.
(2) No change in the glossiness after molding thanks to its excellent heat resistance, leaving a high grade, fresh and neat impression.
(3) High formability.
(4) Excellent adhesion of resin film in the lowest layer to the injection molding resin is excellent.
2. Features of the injection molding
(1) Mirror-finishing by color coating is not necessary.
(2) Excellent heat resistance (Under continuous heat test at 100 °C).
(3) Partial trimming can be applied (Insertion molding).
(4) No need to color the injection molding resin.
|
Product standard: |
Thickness (mm) |
Width (mm) |
Roll (m) |
Uses |
|
Standard specs |
0.35 |
1040 |
50 |
Insert-injection molding |
|
Basic specs |
0.2~0.5 |
1040 |
50~100 |
Insert-injection molding |
|
0.6~2.0 |
1040 |
|
|
*Please consult for special requirements.
*We also accept cut board design.
*Further information concerning construction of an olephin resin is available upon request.
Characteristics of Film:
|
Properties |
Unit |
Typical value |
Testing method |
|
Tensile strength |
N/cm2 |
TD 4700, MD 4500 |
ASTMD - 638 |
|
Tensile elongation |
% |
TD 10, MD 13 |
ASTMD - 638 |
|
Heating shrinkage |
% |
TD -4, MD 0.1 |
|
|
Impact resistant |
|
10/10 |
DuPont style impact H:10cm, Weight:300g |
|
Pencil hardness |
|
HB |
JIS K 5400 |
|
Chemical resistance Alkali |
|
|
|
|
Heat resistance |
|
No change |
80°C × 400hours |
|
Humidity resistance |
|
No change |
50°C × 95%RH × 250hours |
|
Heating and cooling cycle test |
|
No change |
-30 <!--[if !vml]--> |
|
Weather resistance |
|
No change |
Black panel; 83°C × 800hours |
<!--[endif]-->80 <!--[if !vml]-->
